• Garage door seal installation in Melbourne and surrounds
1 1

Garage Door Seal Installation – Melbourne & Surrounds, VIC

Garage Door Seal Installation – Melbourne & Surrounds, VIC

$249.00 AUD
$249.00 AUD
Sale Sold out

Garage door seal installation in Melbourne and surrounds, VIC, by a qualified carpenter: brush seals on the top and sides of a sectional or roller door, a new rubber bottom seal, or the whole perimeter, fitted in one to two hours a door. The standard price covers about an hour’s drive from our installer in Ringwood; the Mornington Peninsula, Geelong and the Surf Coast, the Macedon Ranges and Phillip Island attract a travel charge, quoted before you order.

This price is the fitting: add the seal kit for your door to the same order. Please email us a photo of your door with the gap measurements and your suburb before you order, so we can confirm the kit and the price. Each extra door at the same address is $50 off, and our 10-year warranty covers the fitting.

View full details

The straight answers

Garage door seal installation across Melbourne and surrounds by a qualified carpenter: brush seals on the top and sides, the rubber bottom seal, or both, fitted in one to two hours a door. Email us a photo of your door before you order and we’ll confirm the kit and the price.

  • $249top & sides, or bottom
  • $349top, sides & bottom
  • $50 offeach extra door
  • 10 yearswarranty covers the fitting

Which installation do I need?

Fixed prices per door for the fitting. Prices are live from the shop.

  • Top & sides

    Brush seals fitted across the lintel and down both sides of a sectional or roller door.

    • Measuring and cutting the carriers
    • Fitting them to the lintel and jambs (or behind a roller door’s tracks)
    • Adjusting until the door runs as it did before
    • Testing the opener’s safety reverse

    $249

    Choose top & sides

  • Bottom seal

    The perished rubber out, a new 80 mm EPDM bottom seal in.

    • Removing the old bottom rubber
    • New aluminium track screwed over the old one
    • New rubber fed in and trimmed
    • Checking for daylight along the floor

    $249

    Choose bottom seal

  • Every gap

    Top, sides & bottom

    Every gap the door has, sealed in one visit.

    • Everything in top & sides
    • Everything in bottom seal
    • One visit, one to two hours per door

    $349

    Choose the full perimeter

This is the fitting; the seal kit for your door goes on the same order: sectional, roller or bottom seal kits. Two or more doors at the same address? Each one after the first is $50 off: email us and we’ll send one invoice with the discount applied.

Where we install in and around Melbourne

About an hour’s drive from the installer at the standard price; further out for a travel charge.

Standard price

Our Melbourne installer is based in Ringwood, in Melbourne’s east, and the standard price covers about an hour’s drive from there without toll roads: the councils listed below, from the Yarra Ranges and the Dandenongs through the east and inner city to Frankston and Cardinia.

Travel charge

Further out, we come to the Mornington Peninsula, Geelong, the Bellarine and the Surf Coast, the Macedon Ranges and Phillip Island for a travel charge, quoted before you order. Not on either list? Email us your suburb: if it’s within reach, we’ll quote it.

Councils at the standard price

Not sure which council you’re in? Email us your suburb.

East
Maroondah, Knox, Whitehorse, Manningham, Monash, Yarra Ranges
Inner and north
Boroondara, Stonnington, Yarra, City of Melbourne, Port Phillip, Nillumbik, Banyule, Darebin, Whittlesea
South-east and bayside
Glen Eira, Bayside, Kingston, Greater Dandenong, Casey, Cardinia, Frankston

Outside Sydney, Melbourne and Brisbane? The kits ship free Australia-wide, and most people fit their own in one to two hours with our install videos and printable guides.

How booking works

Five steps from a photo to a sealed door.

  1. Email a photo

    Send a photo of your door with the gap measurements and your suburb to info@sealyourgarage.com.au.

  2. We confirm

    We confirm the kit, the installation price and any travel charge, and flag anything unusual about your door before you spend a cent.

  3. Order

    Add the kit and the Melbourne installation to one order and pay online.

  4. We hand over

    We pass your details to our Melbourne installer, post your kit, and let the installer know when it should arrive.

  5. You’re booked in

    The installer calls or messages to book a day and time that suits you both, then fits the seals in one to two hours a door.

What Melbourne customers call us for

The problems a garage door seal installation fixes.

  • A freezing garage in winter

    A garage that doubles as the home gym, office or workshop is only usable through a Melbourne winter if the wind isn’t coming round the door. Sealing the full perimeter stops the draughts.

  • Water coming in under the door

    A perished bottom rubber lets rain run in along the floor. We pull it out and fit 80 mm EPDM in a new track over the old one, closing gaps up to 35 mm.

  • Bushfire-prone hills

    The Dandenongs, the Yarra Ranges and Nillumbik are bushfire country. There we fit the fire retardant kits: a BAL-FZ rated brush in non-combustible aluminium carriers. Check what your certifier needs for your rating.

  • Dust, leaves and spiders

    Gaps at the top and sides let dust and leaves in every time the wind picks up, and spiders move in behind them. Brush seals on the lintel and jambs close them.

Finished jobs

A few recent jobs around Sydney: brush seals on sectional and roller doors.

  • Top and side brush seals meeting at the corner of a timber-look sectional garage door
    Top and side seals meeting at the corner of a timber-look sectional door, north-west Sydney.
  • Side brush seal fitted beside the galvanised track of a sectional garage door, against a rendered block pier
    A side seal beside the track of a sectional door, northern Sydney.
  • Side brush seal running the full height of a grey panel lift garage door
    A side seal running the full height of a grey panel lift door, western Sydney.
  • Inside a rural shed: brush seal along the lintel above the roller door curtain
    Inside a rural shed in south-west Sydney: the lintel seal above the roller door (this door needed no side seals).

Installation questions

The ones we’re asked most. More on the FAQ page.

How much does garage door seal installation cost in Melbourne?

$249 to fit the top and sides, or the bottom seal on its own; $349 for the full perimeter. That’s the fitting; the seal kit is priced separately and goes on the same order. Each extra door at the same address is $50 off, and suburbs outside the standard area pay a travel charge, which we quote before you order.

Where is your Melbourne installer based?

In Ringwood, in Melbourne’s east. The standard price covers about an hour’s drive from there without using toll roads; The Mornington Peninsula, Geelong, the Bellarine and the Surf Coast, the Macedon Ranges and Phillip Island and anywhere else further out attract a travel charge, quoted before you order. Email your suburb and we’ll tell you which you’re in.

Do I buy the seal kit separately?

Yes, on the same order. Add the kit for your door (sectional or roller, single or double, weatherproof or fire retardant, plus the bottom seal if you want it) and this installation. Not sure which kit? Email a photo and your measurements first and we’ll tell you.

How soon can you come?

Once you’ve paid, we post your kit (it goes out the same or next business day) and pass your details to the installer with the expected delivery date. The installer then calls or messages to book a day and time that suits you both, usually once the kit has arrived.

Do I need to be home?

Yes, which is why the installer books the day and time with you directly. The area round the door needs to be clear, including the car if it’s parked close, and the opener switched on so we can run the door and test its safety reverse before we leave.

Which doors do you install on?

Sectional (panel lift) and roller garage doors, single and double, up to 3 m high, from B&D, Steel-Line, Gliderol, Centurion, Taurean, Danmar and most other brands. We don’t install on tilt doors: the gaps change shape as the door swings, and our seals aren’t designed for it.

What if my door has a big gap or doesn’t run well?

Tell us before you order. The standard price covers a standard job; an oversized gap, a door that binds or sits crooked, or an opening with nothing to fix to above the door may need a different approach or a quote. We’d rather look at a photo first than turn up and surprise you.

Is the installation covered by the warranty?

Yes. When we fit the seals, our 10-year warranty covers the fitting as well as the product: if something isn’t right, we come back and fix it.